Actisense NMEA 0183 Guide d'installation télécharger pdf (Page 18)

432-0007-00-28-en-US v100 Integration with NMEA Devices – Application Note

The ShipModul uses port number 10110, which is a registered port for NMEA data. Therefore the UDP

Terminal of the Radar Server configuration is also set up to use port 10110. Open the camera server.ini

configuration file with a text editor, as in the first example. Perform a search of the file for “Sensor 1” to

locate the section related to the UDP Terminal:

[Sensor 1: TERMINAL Configuration - Device 0]

Enabled=yes

IP Address=192.168.250.94

UDP Port=10001

UDP Local Port=10110

Local IP Address=eth0

Type=UDP Terminal

Modify the file to use the correct IP address and UDP port, save the file, and upload it to the camera with a

web browser. Stop and start the Camera Server so the new configuration settings are used.

1 2 ... 13 14 15 16 17 18 19 20 21 22

Pas de commentaire

Actisense NMEA 0183 Guide d'installation Page 18