Actisense NMEA 0183 Guide d'installation télécharger pdf (Page 9)

432-0007-00-28-en-US v100 Integration with NMEA Devices – Application Note

Moxa NPort Server

In order to use the NPort server on the network, it will need to have an IP address that is compatible with

the IP address of the camera, so it is likely it will need to be changed. In this example the NPort is

assigned IP address 192.168.250.97. Refer to the NPort user manual for information about using the NPort

Administrator software to change the IP address and other configuration parameters.

Use the Configuration option to set the Serial parameters to match the radar. For example, NMEA 1083

specification uses a baud rate of 4800.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

Pas de commentaire

Actisense NMEA 0183 Guide d'installation Page 9